Excellent cleaning of bridges, braces and implants. The hard sections on both ends of the floss fit perfectly between teeth and under bridges. A thick and soft sponge thread ensures careful and thorough cleaning.
You can also use Supersoft Floss to clean the brackets by extending it under a section of wire and gently flossing back and forth, repeating this on all sections of wire.
Developed in Switzerland.
Application method:
Cleaning between the teeth. Take one of the hard ends and slide it between your teeth, pulling slowly until the spongy center reaches your teeth. Bend the floss around the edge of one of the teeth and, using a smooth back and forth motion, slowly floss from top to bottom. Repeat the procedure between all teeth, using a fresh section of dental floss, or take a new strand if necessary
Cleaning of implants. Wrap one of the hard ends around the base of the implant, pulling it through on one side and out on the other. Holding the ends between the thumb and forefinger of both hands, gently floss back and forth around the implant. Repeat on all implants, using a fresh strand for each.
Cleaning bridge-like prostheses. Take one of the hard ends and slide it under the bridge, pulling slowly until the spongy middle reaches the gum below. Working from back to front, gently pull the floss along the bridge. Repeat on all bridges, using a fresh pre-cut strand for each.
For cleaning braces. Take one of the hard ends and slide it between the teeth over the braces wire, pulling slowly until the spongy center reaches the teeth. Bend the floss around the edges of one of the teeth, cleaning it with a gentle back and forth motion. Repeat the procedure between all teeth, using a fresh section of dental floss, or take a new strand if necessary
